Manual for XR-1 Dashcam

XR-1 Dashcam

User Manual

Product Introduction

CHIGEE XR-1 is a screenless smart motorcycle dashcam designed specifically for riding environments. It features an automotive-grade protective structure, a high-definition dual-channel recording system, and an innovative voice status notification feature, providing riders with a stable, reliable, and clear and reliable footage. The PCB uses a floating shock-absorption design that helps protect recordings even under heavy vibration or severe impacts. With an IP69K protection rating, the XR-1 is built to withstand long-term exposure to rain, mud, and high-pressure washing in harsh riding conditions.

Package List

XR-1 Host ×1

Camera ×2

Camera Mount Clamp ×2

Camera Base ×2

Power Cable ×1

Cable Clip ×2

Removal tool x2

Velcro strap ×2

Nylon cable tie ×5

3M Sticker ×4

Chigee Sticker ×1

Feature Details

White Indicator Light ①

Solid On: Updating
Flashes 3 times: GNSS signal acquired (Requires optional GNSS remote)
Flashes Once: Button press detected

Red Indicator Light ②

Flashing: Recording
Solid On: Unformatted / No card / Camera not connected / Other faults

Blue Indicator Light ③

Flashing: Connecting to phone
Solid On: Phone connected

Lock Button ④

Short Press button: Lock current recording
Long Press (8s): Force restart

Photo Button ⑤

Short Press: Take photo
Long Press (10s): Force format SD card

microSD Card Slot

USB Type-C Port

SD Card Installation

Please use a microSD card rated U3 to ensure stable video recording. If you use a slower card, videos may stutter or fail to save. (microSD card sold separately.)

*Important: After installation, press the waterproof plug firmly until flush and securely tighten the T5 screw. Failure to seal this port correctly will compromise waterproofing. Water damage resulting from improper sealing is not covered under warranty.

Camera Installation

Fixed Clamp – Secures the bracket in place

M4x20 Plum Blade Adjustment Screw – Adjusts the front pitch angle

M4 Hex Nuts – Locks components firmly

3M VHB Double-Sided Adhesive – Strong and durable mounting tape

Orientation Mark – Helps align the correct installation direction

Bendable Camera Base – Flexible base for better mounting fit

Use 3M VHB double-sided adhesive to mount the camera in the ideal position. Clean the surface thoroughly before applying. Press firmly for at least 10 seconds, then let it sit for 30 minutes to ensure strong adhesion.