CG Quick-Release Module

User Manual

1. Disassemble the Ball-Head Base

Remove the standard ball mount from the AIO-6 Display.

2. Install the CG Quick-Release Module

Install the CG quick-release module onto the main unit and tighten the screws. Recommended torque: 1.4 Kgf·cm.

*The screws are pre-coated with thread locker. Please do not apply additional adhesive.

3. Installation of CG Quick-Release Base

Select the correct bracket for your motorcycles. Securely mount the quick-release base to the appropriate position on the bike.

How to choose the mount?

4. Complete the Installation and Check

Firmly snap the unit into the base until you hear a 'click,' indicating the installation is complete. Make sure the unit is securely attached.

*Ensure a secure installation to prevent the unit from falling due to looseness. 

*After removing the main unit, attach the waterproof protective cover.

Parameters

Product Name

CG Quick-Release Module

Dimensions

55 x 28 x 67 mm

Material

PA66

Waterproof Rating

IP68

Optional Accessories